A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the IP Security Protocol Working Group of the IETF.
Title : Dynamic remote host configuration
over IPSEC using DHCP
Author(s) : B. Patel
Filename : draft-ietf-ipsec-dhcp-00.txt
Pages : 5
Date : 04-Dec-97
IPSEC is a protocol suite defined by IETF working group on IP
security to secure communication at the network layer between
communicating peers. This protocol is comprised of three primary
elements: 1) ISAKMP/Oakley[2], 2) IPSEC AH [4]and 3) IPSEC ESP [5].
ISAKMP/Oakley is the key management protocol while AH and ESP are
used to protect IP traffic. Both AH and ESP can be used in tunnel or
transport mode. Among many applications enabled by IPSEC tunnel and
transport modes, an interesting and useful application is connect a
remote host (e.g., roaming user) to the intranet through firewall
(or secure network gateway) using IPSEC tunnels.
Internet-Drafts are available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-ipsec-dhcp-00.txt".
A URL for the Internet-Draft is:
ftp://ds.internic.net/internet-drafts/draft-ietf-ipsec-dhcp-00.txt
Internet-Drafts directories are located at:
Africa: ftp.is.co.za
Europe: ftp.nordu.net
ftp.nis.garr.it
Pacific Rim: munnari.oz.au
US East Coast: ds.internic.net
US West Coast: ftp.isi.edu
Internet-Drafts are also available by mail.
Send a message to: mailserv@ds.internic.net. In the body type:
"FILE /internet-drafts/draft-ietf-ipsec-dhcp-00.txt".
NOTE: The mail server at ds.internic.net can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
No recognizable part in multipart/alternative.