[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: INTERNAL_SUBNET in draft-ietf-ipsec-isakmp-mode-cfg-05

To: Eric Bomarsi <ebomarsi@lucent.com>
Subject: Re: INTERNAL_SUBNET in draft-ietf-ipsec-isakmp-mode-cfg-05
From: Stephane Beaulieu <stephane@cisco.com>
Date: Tue, 21 Mar 2000 09:10:17 -0500
CC: ipsec@lists.tislabs.com, royp@cisco.com
Organization: Cisco Systems
References: <38D642DC.8DD9ABF2@lucent.com>
Reply-To: @cisco.com
Sender: owner-ipsec@lists.tislabs.com

Hi Eric,

It's an error.  Roy was suppose to fix this...



Eric Bomarsi wrote:

> Why is the INTERNAL_IP4_SUBNET attribute in draft-ietf-ipsec-isakmp-mode-cfg-05
> limited to a length of 4 octets?
>
>    INTERNAL_IP4_SUBNET        13     Variable   0 or 4 octets
>
> The example implies 8 octets which makes sense.
>
>    ATTR2(REPLY) =
>      INTERNAL_ADDRESS(192.168.219.202)
>      INTERNAL_NETMASK(255.255.255.0)
>      INTERNAL_SUBNET(291.168.219.0/255.255.255.0)
>
> I don't want to apply the INTERNAL_NETMASK to all the INTERNAL_SUBNETs because
> that would assume all subnets to be the same size.
>
> Thanks
> /eb

References:

INTERNAL_SUBNET in draft-ietf-ipsec-isakmp-mode-cfg-05

From: Eric Bomarsi <ebomarsi@lucent.com>

Prev by Date: No Subject
Next by Date: RE: Adelaide Agenda?
Prev by thread: INTERNAL_SUBNET in draft-ietf-ipsec-isakmp-mode-cfg-05
Next by thread: Q: What is advantage of tunnel mode between host to host scenrio?
Index(es):
- Main
- Thread