[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Q: EAP Message Format
so, Francis and Charlie, will your suggested change to the text be made in
the -09?
> -----Original Message-----
> From: Francis Dupont [mailto:Francis.Dupont@enst-bretagne.fr]
> Sent: Wednesday, July 09, 2003 1:13 AM
> To: Ricky Charlet
> Cc: ipsec mailingList
> Subject: Re: Q: EAP Message Format
>
>
> In your previous mail you wrote:
>
> So, as currently specified in draft-08, the length
> field of the EAP
> message format may be either 2 or 4 bytes depending upon the type.
>
> => no, the text in the draft is buggy but is simpler than
> your proposal.
> Current text is:
>
> o Type (one octet) is present only if the Code field is Request
> (1) or Response (2). For other types, the EAP message length
> MUST be four octets and the Type and Type_Data fields MUST NOT
> be present. ...
>
> The fixed text should be:
>
> o Type (one octet) is present only if the Code field is Request
> (1) or Response (2). For other codes, the EAP message length
> ^^^^^
> MUST be four octets and the Type and Type_Data fields MUST NOT
> be present. ...
>
> So if the code is not Request or Response the length field
> *value* is 4
> and there is nothing after the length field.
>
> Regards
>
> Francis.Dupont@enst-bretagne.fr
>