[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Ipsec] I-D ACTION:draft-ietf-ipsec-ikev2-15.txt



A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the IP Security Protocol Working Group of the IETF.

	Title		: Internet Key Exchange (IKEv2) Protocol
	Author(s)	: C. Kaufman
	Filename	: draft-ietf-ipsec-ikev2-15.txt
	Pages		: 109
	Date		: 2004-8-16
	
This document describes version 2 of the Internet Key Exchange (IKE)
protocol.  IKE is a component of IPsec used for performing mutual
authentication and establishing and maintaining security
associations.
This version of the IKE specification combines the contents of what
were previously separate documents, including ISAKMP (RFC 2408), IKE
(RFC 2409), the Internet DOI (RFC 2407), NAT Traversal, Legacy
authentication, and remote address acquisition.
Version 2 of IKE does not interoperate with version 1, but it has
enough of the header format in common that both versions can
unambiguously run over the same UDP port.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ipsec-ikev2-15.txt

To remove yourself from the I-D Announcement list, send a message to 
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-ipsec-ikev2-15.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-ipsec-ikev2-15.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-ietf-ipsec-ikev2-15.txt>
_______________________________________________
Ipsec mailing list
Ipsec@ietf.org
https://www1.ietf.org/mailman/listinfo/ipsec