[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
FW: IPSEC Interop
Does anyone else have an IPSEC test system reachable on
the internet or via ISDN?
Cheers, Steve.
> ----------
> From: Daniel Harkins[SMTP:dharkins@cisco.com]
> Sent: Thursday, August 20, 1998 4:12 PM
> To: Stephen Waters
> Subject: Re: IPSEC Interop
>
> Hi Steve,
>
> We don't support 40bit DES for IPSec. There are IPSec images for the
> 2600 available. Ask whoever sold you the routers. Also if you have a
> CCO account you can obtain them from www.cisco.com.
>
> But for interoperability you can just test against the router we have
> available for just that purpose. The IP address is 192.31.7.219. If you
> tell me your IP address I'll set up a pre-shared key ("mekmitasdigoat")
> for you and you can test at your leisure.
>
> Let me know,
>
> Dan.
>
> On Thu, 20 Aug 1998 09:54:11 BST you wrote
> >
> > Hi Daniel,
> >
> > Just a shot in the dark, but we are looking to start interop testing
> > IPSEC and would
> > like to start with a CISCO device. We have recently received two
> > 2600s, but we are
> > having difficulty getting an IPSEC image to run on it - 40-bit is
> > fine, we just want to get
> > the IKE/ESP/AH interop tested for now.
> >
> > Is there any chance you could help with this - a Beta perhaps?
> > Would you be
> > interested in working through some interop tests with us? If needs
> > be, we could
> > even connect with ISDN transatlantic? I did some Triggered RIP
> > testing with
> > Xylan like that some years ago.
> >
> > We've exchanged mail before on IKE matters - so I thought I'd ask.
> > Thanks, Steve.
> >
> >
>
Follow-Ups: